Pool tables can develop worn spots and rips in the surface if not treated carefully. This will throw a game off for most people and charges of fixing the game in favor of you can be brought by even the friendliest competitors. The nature of the covering, which is felt, will have a lot to do with how the table is used, so a rip or worn area must be repaired or replaced. This pool table refelting is best done by a company who does this all of the time.
If it is a small rip, it can be repaired by you with a lot of patience and a good quality adhesive. A very sharp knife will also be needed as well as some sandpaper. Measuring the hole, cutting the felt and making sure it fits will take attention to detail. Just the right amount of glue will also not be easy to judge. But, again, looks are not as important as how it might effect the game.
Recovering the entire piece will present itself as a necessary step when you find the worn, faded look that may be present after you have had the table for a few years. This is something that can be a do it yourself project if you follow a few simple rules. A conversation with the personnel at a pool table supply house will help you understand what you need to do. Several firms in the Denver, CO area will assist you with this.
The professionals that do this have the experience to see it is done right. They will be able to help you see other possibilities for your table and help you with the decorative elements in the rest of the room. One of he first questions they will ask will have to do with the color you are interested in.
Most stock pool tables come in the basic, standard, green felt. This makes yours look like all others. You may want to stand out a little with other colors that are available. This is your time to decide about this as you can select reds, blues, purples, creams and several other colors. There are also pieces that have geometric designs and some with actual images on them. This will help brighten your room and that next party.
When the professionals arrive at your home, you will be able to see what they are doing and ask questions. They will begin by making sure of the measurements. The rails will come off to make it easy to remove the old felt. Old adhesive and staples will be removed and any rough spots will be sanded or prepared otherwise.
The exacting cuts on the felt will be accomplished, both lengthwise and for width. There will be a little left over for the staples to hang on to. There will then be applied a very thin coating of adhesive, but not too much. The felt is laid down and stretched, in all directions, to ensure a tight fit. This will then be stapled in the same location where the rails will be reattached.
The rails are taken apart, very carefully, and covered as well. They are reinstalled and weights are placed on the entire table to ensure a good fir and curing. This should stand, by itself, for about 24 hours as it cures properly. The company will make sure you are satisfied and stop by to deal with any issues. They might also ask you for a game to try it out.
If it is a small rip, it can be repaired by you with a lot of patience and a good quality adhesive. A very sharp knife will also be needed as well as some sandpaper. Measuring the hole, cutting the felt and making sure it fits will take attention to detail. Just the right amount of glue will also not be easy to judge. But, again, looks are not as important as how it might effect the game.
Recovering the entire piece will present itself as a necessary step when you find the worn, faded look that may be present after you have had the table for a few years. This is something that can be a do it yourself project if you follow a few simple rules. A conversation with the personnel at a pool table supply house will help you understand what you need to do. Several firms in the Denver, CO area will assist you with this.
The professionals that do this have the experience to see it is done right. They will be able to help you see other possibilities for your table and help you with the decorative elements in the rest of the room. One of he first questions they will ask will have to do with the color you are interested in.
Most stock pool tables come in the basic, standard, green felt. This makes yours look like all others. You may want to stand out a little with other colors that are available. This is your time to decide about this as you can select reds, blues, purples, creams and several other colors. There are also pieces that have geometric designs and some with actual images on them. This will help brighten your room and that next party.
When the professionals arrive at your home, you will be able to see what they are doing and ask questions. They will begin by making sure of the measurements. The rails will come off to make it easy to remove the old felt. Old adhesive and staples will be removed and any rough spots will be sanded or prepared otherwise.
The exacting cuts on the felt will be accomplished, both lengthwise and for width. There will be a little left over for the staples to hang on to. There will then be applied a very thin coating of adhesive, but not too much. The felt is laid down and stretched, in all directions, to ensure a tight fit. This will then be stapled in the same location where the rails will be reattached.
The rails are taken apart, very carefully, and covered as well. They are reinstalled and weights are placed on the entire table to ensure a good fir and curing. This should stand, by itself, for about 24 hours as it cures properly. The company will make sure you are satisfied and stop by to deal with any issues. They might also ask you for a game to try it out.
About the Author:
You can visit www.americanbilliardsservice.com for more helpful information about Pool Table Refelting Is Best Left To The Professionals.
0 comments:
Post a Comment